We need to remove the self-tapping screws of the rear cover first, remove the cover plate, and then remove the 4 fixing bolts. At this time, we can see that there is a sleeve inside the machine, just remove the screws and the sleeve.
The specific operation method is as follows:
1. The transport bolts are on the back of the washing machine and play a fixed role. There are 3 to 4 fixed screws. If you choose a drum-type washing machine at home, there is a certain noise during operation, especially in the state of dehydration, the machine will vibrate violently, because the screws at the back are loose.
2. If you need to disassemble and assemble, first we need to use a wrench to turn the screws. After some loosening, slowly pull out the long screws inside, and then remove the plastic protection block. Insert the jam card into this gap to prevent dust from entering the inside of the washing machine.
3. Reinstall the bolts back, and use a wrench to tighten the bolts, so that the washing machine will not shake when running.